Triangle Hammer Set For 1/12 Excavator (Yellow Paint)

Triangle Hammer Set For 1/12 Excavator (Yellow Paint)

€320.0

  • Model: 270036
  •        Sale Promotion Item :  over 300 eur off 3% over 500 eur off 5% over 1000 eur off 10%

Add to Cart:

Tell a Friend
Write Review



Product description


The Hammer Set is a set, including: hammer body, special controller, and extension cord.

Fits 1 /12 PC270 Excavator  #210065

Fits   1/12 LB954 Excavator #210090

Fits   1/14 360L Excavator #250325/230018


attention: 
The output voltage of the controller is high,please do not short circuit!
Even within half an hour after disconnecting the power, it is strictly forbidden to short-circuit or overlap the body of the excavator, otherwise the controller will burn out.

If you want to replace the bucket or other accessories after using up the breaker, please do the insulation work.


  • Electronic Drive
  • Fits 11-12 V Voltage
  • Need to occupy 1 channel of the remote 
  • There may exsit color differences
  • Working Power : 200W
  • The hammer must press the land or the stone / the broken object can be opened to work , otherwise it will cause damage ( It's the same as reality )





































Photos of Installed on the 954 excavator #210090


























Instructions for use

Note ! Forbid let It working when the breaker drill not press the ground / stone !! Otherwise the hammer will be damaged

To let it work need 1× battery  1× remote channel

About battery  :  Please Use 11-12V Battery . Don't be below/above 11-12 V

About Remote Receiver : Need to occupy a remote control channel . please use automatic reset channel



About Wiring